ENVISON

로그인
KOR
- KOR
- ENG

: 로그인이 필요합니다.

My Page

회원가입

견적 문의

제품
문의

TOP

Xtium-CL MX4: 2 x Camera Link Base(PoCL) 또는 1 x Camera Link Medium, Full, 80 bit (PoCL) 구성 모두를 지원

제품 상세
주요 사양
다운로드
관련 제품

안내: 본 제품의 단종 안내드립니다.

마지막 발주: 2025년 12월 31일
마지막 선적: 2026년 6월 30일
A/S 가능: 2029년 6월 30일 내 warranty 기간

최대한 수리 서비스 예정이나, warranty 기간내 수리 불가시 credit 후 고객 동의에 따라 자체 폐기될 예정입니다.

회수 요청 시 수리되지 않은 상태로 반환되며 credit 발행은 되지 않을 예정입니다.

단종된 제품과 비슷한 사양의 대체 상품을 원하신다면 아래 리스트를 참고 부탁드립니다.

대체 제품	Xtium-CL MX4

Proven Capability. High Speeds.

Building on the field proven capability of Teledyne DALSA’s Xcelera frame grabber series, the Xtium™-CL MX4 is based on industry standard PCI Express™ Gen 2.0 expansion bus to deliver high speed access to host memory. The new Xtium series offers higher bandwidth to sustain Camera Link® 80-Bit modes over longer cable distances and supports a wide variety of area and line scan color/monochrome cameras, all in a compact, half-length, single slot solution.

With great bandwidth comes great responsbility

The Xtium-CL MX4 takes full advantage of PCIe Gen 2.0 x4 platform to deliver a bandwidth in excess of 1.7GB/s, while at the same time supporting PCIe Gen 1.0 slot to deliver 850MB/s. The newly engineered, on-board, Data Transfer Engine (DTE) produces maximum bandwidth without the need for specialized motherboards or chipsets. By enabling maximum sustained throughput and ready-to-use image data, the Xtium-CL MX4 minimizes CPU usage and improves processing times for the host applications. In addition, the Xtium series has been engineered with enhanced memory architecture allowing it to handle different sensor tap topologies while sustaining color decoding at the maximum frame/line rate.

Great features to make your job easier

The Xtium-CL MX4 offers built-in, robust electrical signals for external event synchronization, and status notification LEDs. One or more boards can be synchronized to acquire images from multiple area or line scan cameras simultaneously. The Xtium-CL MX4 supports Base, Medium, Full or 80-Bit mode Camera Link area and line scan, color and monochrome cameras with PoCL capabilities. And all Xtium-CL frame grabbers are built with Teledyne DALSA's Trigger to Image Reliability framework, which controls and monitors the entire process from trigger through image capture and transfer to host memory and helps protect you from data loss.

The Xtium series is engineered to meet the ever-increasing image resolution and faster frame rates of today’s camera technology. So in addition to PCIe Gen 2.0 x4 and Camera Link, upcoming models will support Camera Link HS as well as other emerging interface standards on a PCIe Gen 2.0 x8 platform.

Free acquisition and control software libraries

The Xtium series of frame grabbers is fully supported by Sapera LT SDK. Sapera LT SDK is an image acquisition and control software development toolkit (SDK) for Teledyne DALSA'S cameras and frame grabbers. Hardware independent by nature, Sapera LT offers a rich development ecosystem for machine vision OEMs and system integrators. Sapera LT SDK supports image acquisition from cameras and frame grabbers based on standards including GigE Vision™, Camera Link®, CoaXPress®, and Camera Link HS™.

Fully supported by Sapera™ vision SDK

When combined with a compatible Teledyne DALSA frame grabber, standard Sapera Processing run-time licenses are offered at no additional charge. Sapera Processing is at the heart of Sapera Vision Software, delivering a suite of image processing and analysis functions. These functions include over 400 image processing primitives, barcode tools, pattern matching tools (both area-based and edge-based), OCR, color and blob analysis, measurement, and calibration tools for perspective and lens correction. The standard tools run-time license includes access to image processing functions, area based (normalized correlation based) template matching tools, blob analysis, and lens correction tools.